PQWT-125C Multi-Sensor Water Pipeline Leak Detector

PQWT-125C is intended for combined indoor concealed pipes and outdoor buried pressure networks. Choose 125C when one team needs the two indoor sensors plus the standard outdoor RCS-S3 sensor.

The instrument collects and displays leak-related sound and vibration from a pressurized pipeline. The operator compares several points, narrows the interval and verifies whether the strongest repeatable signal is consistent with the pipe route and the observed water-loss symptoms.

• Indoor branch and main lines
• Outdoor service lines
• Property and facility maintenance
• Municipal, fire and thermal pressure-pipeline work

The published sensor configuration is DMR-V59 + DMR-H40 + RCS-S3. Each sensor has a different contact method and application range, so selecting the correct probe is part of the survey rather than an optional final step.

Keep the sensor stable, use the same contact pressure and settings at comparison points, and avoid touching or moving the cable while listening. Poor contact can create a false change that looks like a leak signal.

• DMR-V59: routine indoor floor measurements
• DMR-H40: walls, cabinets and narrow indoor spaces
• RCS-S3: outdoor pipes up to 100 mm diameter and burial depth up to 3 m

First confirm the pipe route, material, diameter, approximate depth and operating pressure. Record pumps, valves, traffic and other noise sources. Establish a reference reading away from the suspected area before searching for a peak.

Use General Detection to compare a wider route. Reduce the spacing around a repeatable change, then use Location mode to compare the suspected point with nearby control points from both directions. Recheck at a quieter time if machinery or traffic dominates the spectrum.

• Confirm the route and accessible valves or fittings
• Keep gain, volume and sensor placement consistent
• Compare multiple points instead of trusting one loud reading
• Repeat the strongest zone from both directions
• Combine acoustic evidence with pressure, flow, meter and moisture checks

Leak sound usually travels more clearly through rigid pipe, higher operating pressure and firm ground contact. Plastic pipe, low pressure, a very small leak, loose backfill, deep burial and soft surfaces can attenuate the signal.

The published depth and positioning values describe the manufacturer-stated capability, not a universal guarantee. Pipe material, diameter, pressure, burial medium, surface construction, background noise and operator technique all affect field performance.

Send the country, indoor or outdoor application, pipe material, diameter, burial or concealment depth, operating pressure and approximate survey length. These details allow the team to check the selected model and sensor package before quoting.

The standard host warranty is two years. The formal quotation and packing list remain the final reference for current accessories, shipping, training and service coverage.